Skil ME9821-00 Manual Del Propietário página 19

WHEEL MEASURING
MODE
The application underneath
the Wheel Measuring Mode is
beneficial in measuring distance
without end projection target
for the laser beam, such as
measuring on a curved surface.
(Fig.9)
Measuring Length
1. Turn the tool ON, the tool will default to the Laser Measuring
Mode. Press the Side Button
Mode, the wheel measuring mode symbol
After entering into the Wheel Measuring Mode, the wheel
measures continuously. Run the wheel along the distance to be
measured (Fig.10). The wheel measuring symbol
the current measured value is shown on the bottom line of the
display.
Fig. 10
NOTE: all dashes display at the initial starting point (Fig.10).
NOTE: During continuous measurement, the wheel can be moved
forwards or backwards. The measured values will be positive in
both directions. If the direction is changed during the measurement,
the value will be deducted until the starting point (zero point) has
Fig. 9
to switch to the Wheel Measuring
will blink.
blinks and
19