4
English
Introduction
Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips
offers, register your product at www.philips.com/welcome.
Important
Read this important information carefully before you use the appliance and save it for future reference.
Danger
-
Never immerse the motor unit in water or any other liquid and do not rinse it under the tap. Use only
a moist cloth to clean the motor unit.
Warning
-
Do not use the appliance if the plug, the mains cord or other parts are damaged or have visible cracks.
-
Unplug the appliance when not in use.
-
Before you connect the appliance to the power, make sure that the voltage indicated on the bottom
of the appliance corresponds to the local power voltage.
-
Before you insert the plug into the power outlet, make sure that the appliance is assembled correctly.
-
If the supply cord is damaged, it must be replaced by Philips, its service agent or similarly qualified
persons in order to avoid a hazard.
-
This appliance shall not be used by children. Keep the appliance and its cord out of the reach of
children.
-
Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction concerning use of the
appliance in a safe way and if they understand the hazards involved.
-
Children shall not play with the appliance.
-
In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must
not be supplied through an external switching device, such as a timer, or connected to a circuit that is
regularly switched on and off by the utility.
-
Do not put heavy objects on the appliance.
-
Do not move the appliance while it is operating.
-
Do not use a dishwasher to clean the appliance.
-
Make sure to tighten the front panel knobs during assembly.
-
Make sure the appliance is not plugged in when assembling the appliance.
-
Pour in the liquid slowly through the water slot after the appliance starts mixing.
-
Do not put any ingredients that are 60°C/140°F or above into the pasta maker, nor place the pasta
maker in surroundings with high temperature (60°C/140°F), for instance in a high temperature
sterilization. This will damage the appliance.
-
Never pour water into the mixing chamber before you place the chamber lid onto the chamber.
-
Do not pour any liquids into the safety switch hole.
-
Do not select the extrusion only program before the dough is mixing complete. Otherwise, this will
damage the pasta maker.
-
Do not use a scourer, caustic cleaner, or cleaners (for example, gasoline, alcohol, and propanol) to
clean the appliance.
-
Clean the appliance after each use or the appliance might not operate properly.
-
Do not insert any objects into the appliance.
-
Take extra caution when cleaning the appliance to avoid getting cut by any sharp edges.
-
Switch off the appliance and disconnect from supply before changing accessories or approaching
parts that move in use.
-
Never reach into the mixing chamber when the appliance is plugged in.
-
To prevent a short circuit or an electric shock, do not pour water or any liquid onto the display.