How To Power On - AKASO Trace 1 Manual Del Usuario

HOW TO POWER ON

① Insert the car charger with cable into your car's cigarette lighter socket.
② Insert the USB end of the cable of car charger into the dash cam USB port. (Charger is
Input DC12-24V, Output DC 5V 2A.)
2
TRACE 1
NOTES:
① The battery takes about three hours to be charged fully.
② When the battery is charging, the the red light on right top is on; When it charged fully,
the light goes off.
③ The battery can last for about 20 minutes after it is charged fully.
④ The battery is mainly used to power the "parking monitoring" function. For normal video
recording, please connect the car charger to use the power supply. It is not
recommended to use battery power, in order to avoid the battery without power and
cause the parking monitoring function to fail.
⑤ To avoid damaging to the device, please do not charge the battery via the USB data
cable with other adapters.
RECORDING
1. Single Recording (Front Camera) 1080P @60fps
03
All manuals and user guides at all-guides.com
1
① After turning on the camera, press
00:00:23
10/01/2018
② Press to enter setting interface and choose "Video
Press to choose "Resolution", press
to save and exist.
00:01:23
WDR
1080P60
10/01/2018 07:25:52
Video
Resolution
SIZE
Loop recording
1 Dual cam Display
Front
WDR
WDR
button to stop recording.
WDR
1080P60
07:24:52
", press to the Video interface.
to enter setting and choose "1080P(60fps)", press
Resolution
SIZE 1080P(60FPS)
1080P+1080P(30FPS)
1
Front
WDR
04