How To Power On - AKASO Trace 1 Manual

HOW TO POWER ON

① Insert the car charger with cable into your car's cigarette lighter socket.
② Insert the USB end of the cable of car charger into the dash cam USB port. (Charger is
Input DC12-24V, Output DC 5V 2A.)
2
TRACE 1
Note:
① After powering on dash cam through the car charger, the dash cam will automatically
turn on and start recording (if the card has been inserted). If wanting to do some
settings, please firstly stop recording.
② Please charge for 30 minutes before using this dash cam powered by the built-in battery.
③ When the dash cam is connected to the car's cigarette lighter socket through the car
charger, the built-in battery will be charging at the same time, the red indicator light is
on. When it charged fully, the red light goes off.
④ The built-in battery is only used to power the "parking monitor" function.
In normal use, please plug the car charger into the cigarette lighter of the car to power
the dash cam. The built-in battery is not recommended as a normal use of power
supply to the dash cam, in order to avoid the battery no power when parking, and
cause the parking monitoring function to fail.
⑤ The camera can be powered by connecting the phone adapter 5VDC with the USB
Cable to plug into a power outlet.
When charging, please shut down the camera by long press the power button.
Tips
① Blue Flashing light means the camera is recording.
② Red light means the camera is charging.
③ Blue light means the camera is working.
03
RECORDING
1. Single Recording (Front Camera) 1080P @60fps
① After turning on the camera, press
1
② Press to enter setting interface and choose "Video
Press to choose "Resolution", press
to save and exist.
00:01:23
10/01/2018
button to stop recording.
00:00:23
WDR
1080P60
10/01/2018 07:24:52
", press
to enter setting and choose "1080P(60fps)", press
WDR
1080P60
07:25:52
to the Video interface.
04