Connecting Peripheral Equipment; To Select Connected Equipment - Philips digitalTV 32PW6720D/01 Manual De Instrucciones

Connecting peripheral equipment

The television has 2 external sockets situated at the back of the set (EXT1 and EXT2).
The EXT1 socket has audio and video inputs/outputs and RGB inputs.
The EXT2 socket has audio and video inputs/outputs and S-VHS inputs.
Video recorder
EXT 2
Other equipment
EXT 1
Side connections
.
Ÿ ¤
EXIT/OPTIONS
VCR
¢ ∫
DVD
› Ó
Œ
Ø
MODE CANCEL
16
All manuals and user guides at all-guides.com
Video recorder (only)
Carry out the connections featured opposite.To record digital
programmes from your TV, the VCR must be connected to EXT2.
If your video recorder does not have a euroconnector socket, the
only connection possible is via the aerial cable.You will therefore
need to tune in your video recorder's test signal and assign it
programme number 0 (refer to manual store, p. 12).
To reproduce the video recorder picture, press
will not be possible to record digital channels.
Video recorder with decoder
Connect the decoder to the second euroconnector socket
of the video recorder.You will then be able to record
scrambled transmissions.
Satellite receiver, decoder, DVD, games, etc.
Carry out the connections featured opposite.
To optimise picture quality, connect the equipment which
produces the RGB signals (digital decoder, games, etc.) to
EXT1, and the equipment which produces the S-VHS
signals (S-VHS and Hi-8 video recorders, certain DVD
drives) to EXT2 and all other equipment to either EXT1
or EXT2.
Carry out the connections featured opposite.
With the
For a monophonic device, connect the audio signal to the
AUDIO L input. Use the
left and right speakers of the TV set.
Headphones
When headphones are connected, the sound on the TV set
will be cut.The
VHS, 8 mm level.
The headphone impedance must be between 32 and 600 Ohms.
S-VHS
Available in certain models only.

To select connected equipment

n
Press the key to select EXT1, EXT2
from the EXT2 socket) and AV for the side connections.
Most equipment (decoder, video recorder) carries out the switching itself.
n
key, select .
AV
e
key to reproduce the sound on the
@ " #
keys are used to adjust the volume
S-VHS2 (S-VHS signals
/
0
. In this case it