Uline Н-2671 Instrucciones De Ensamble página 2

Figure 1
Figure 2
Figure 3
PAGE 2 OF 6
ASSEMBLY INSTRUCTIONS
1. Verify all parts are present before beginning. Hardware
is located in a white box.
2. Flip the tabletop upside down. Take one leg at a time
and loosely attach to the tabletop using one bolt,
Right
one washer and one nut. The leg braces are an inside
Left
mount. The legs are labeled left and right. Match the
legs to the left and right markings on the underside of
the table. (See Figure 1)
3. Insert the cross brace with the umbrella holder facing
upward and loosely bolt to the corresponding corners
using one bolt, one washer and one nut.
(See Figure 2)
Underside
of Table
Underside
of Table
4. Flip the table upright and loosely attach the three
bench seats to the legs with the leg braces having an
inside mount. (See Figure 3)
5. Ensure the tabletop and bench seats are level, then
tighten each bolt, finishing with the cross brace.
1-800-295-5510
uline.com
NOTE: H-2300 mounting hardware sold
separately.
0321 IH-2671