Deactivating The Travel Lock; Ordering Accessories - Philips QP6520 Manual De Instrucciones

ENGLISH
12

Deactivating the travel lock

1 Press the on/off button for 3 seconds.
- While you deactivate the travel lock, the display counts down. Then the
travel lock symbol lights up and switches off.
- The appliance is now ready for use again.
Replacement
Replacing the blade
- For optimal cutting and gliding performance of the blade, we advise you
to replace the blade every 4 months or when it no longer provides the
shaving or trimming results you expect. The advice of replacing every
4 months is based on two full shaves a week. Depending on your usage
behavior the exact lifetime of the blade could be longer or shorter.
Similar to what you would experience with a manual blade, the blade
becomes blunt over time, which results in increased hair pulling and
reduced cutting performance. At the same time, the glide coating on
the surface of the blade slowly wears off.
1 Push the blade release slide upwards carefully, and hold the blade on
its sides to remove the blade and prevent it from flying away.
2 Hold the new blade on its sides and press it onto the handle ('click').
Note: When you hear a click the new blade is placed correctly and ready for use.

Ordering accessories

To buy accessories or spare parts, visit www.shop.philips.com/service
or go to your Philips dealer. You can also contact the Philips Consumer
Care Centre in your country.
The following parts are available:
- QP210 Blade 1-pack
- QP220 Blade 2-pack