EGO ST1620T Manual De Operaciones página 32

PROBLEM
The cutting
line cannot be
wound into the
trimmer head
properly.
The cutting
line cannot
be passed
through the
trimmer head
when inserting
the line.
32
56-VOLT LITHIUM-ION CORDLESS BRUSHLESS STRING TRIMMER — ST1620/ST1620-FC
CAUSE
◾
Improper cutting line is used.
◾
Grass debris or dirt has
accumulated in the trimmer head
and blocked the movement of line
spool.
◾
Motor is overheated due to
repeatedly operating the line
winding system.
◾
Low battery capacity
◾
The line is not wound into the
spool assembly.
◾
Trimmer head malfunction.
◾
The cutting line is split or bent at
the end.
SOLUTION
◾
We suggest that you use EGO
original nylon cutting line see
"Recommended Cutting Line"
section in this manual. If using
EGO nylon line and the problem
persists, please call EGO customer
service for advice.
◾
Remove the battery, open the
trimmer head and clean it
thoroughly.
◾
Let the string trimmer work under
no load for a few minutes to cool
the motor, then try to reload the
line.
◾
Charge the battery.
◾
Pull out the line and reinsert it.
◾
Call EGO Customer Service for
help.
◾
Cut the worn end of line and
reinsert.