EGO ST1620T Manual De Operaciones página 24

5. Pull the line from the other side until
equal lengths of the line appear on
both sides of the trimmer head
(Fig. 22).
6. Install the battery pack onto the
string trimmer.
7. Press and hold the POWERLOAD
button to start the line-winding
motor. The line will be wound into
the trimmer head continuously
(Fig. 23).
8. Watch the remaining line length
carefully. Prepare to release the
button as soon as approximately
8.5 inches (22 cm) of line are left
on each side. Briefly press the line
loading button to adjust the length
until 7 inches (18 cm) of the line is
showing on each side.
NOTICE: In case the line is pulled into the trimmer head by accident, open the head
and pull the cutting line out from the spool. Follow the section "RELOAD THE CUTTING
LINE" in this manual to reload the line.
24
56-VOLT LITHIUM-ION CORDLESS BRUSHLESS STRING TRIMMER — ST1620/ST1620-FC
22
Cutting Line
23
7" (18cm)