Assembly - Headboard Bracket; Important - GLIDEAWAY Comfort Base NAVIGATE 2.0 Manual De Instrucciones

Assembly - Headboard Bracket

Assembly - Headboard Bracket
Headboard brackets may not be standard with purchase of adjustable base and can be
IMPORTANT: The headboard bracket must be assembled to the base AFTER the bed
purchased separately. See page 16 to purchase.
base has been completely assembled. After assembling the bed according to the
IMPORTANT: The headboard bracket must be assembled to the base AFTER the bed
owner's manual, see this sheet to assemble the headboard bracket.
base has been completely assembled. After assembling the bed according to the
What is Included?
owner's manual, see this sheet to assemble the head board bracket.
Unpack the kit and make sure the following is included:
Unpack the kit and make sure the following is included:
Bed Attachment
PART A
Qty: 2
M8 Bolt
PART E
Qty: 4
1
Completely raise the
headsection of the bed
to access the frame to
which the headboard
bracket will mount.
Identify the two thread-
ed holes that will be used
to mount bed attach-
ment ( Part A) in Step #2
2
Line up the holes in the
bed attachment (Part A)
with the two threaded
holes on the bed base.
Make sure the horizontal
tting of the bed attach-
ment (Part A) points
towards the inside of the
bed. Insert two screws
(Part D) provided with the
kit into the threaded holes
and tighten with the Allen
key (Part H) provided with
the kit.
Horizontal Shaft
PART B
Qty: 2
M8 Nut
PART F
Qty: 4
Fig. 1
Fig. 2
10
Headboard Attachment Plate
PART C
Qty: 2
Washer 10 Zinc
PART G
Qty: 4
PART D
M8x16mm Hex Bolt
PART D
Qty: 8
Allen Key
PART H
Qty: 1
PART A