Indicator Leds - Peavey Architectural Acoustics IP-Six Manual Del Usuario

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Input Impedance
Hum and Noise
Crosstalk
Current Draw @ 1/8 power
Current Draw @ 1/3 power
Idle Current Draw
Max. Current Draw
Thermal Emissions (BTU/hr.)
Cooling
Controls

Indicator LEDs

Protection
Connectors
Construction
Dimensions
Packaged Weight
Unit Weight
IP
-Six
SPECIFICATIONS
15k ohms, balanced
> -110dB, "A" weighted referenced to rated 4 ohm power
> -70dB, "A" weighted referenced to rated 4 ohm power
465 watts @ 2 ohms, 320 watts @ 4 ohms, 210 watts @ 8 ohms
996 watts @ 2 ohms, 683 watts @ 4 ohms, 396 watts @ 8 ohms
30 watts
1752 watts @ 2 ohms, 1158 watts @ 4 ohms, 710 watts @ 8 ohms
683 @ 1/8 Power into 2 ohms
512 @ 1/8 Power into 4 ohms
307 @ 1/8 Power into 8 ohms
80 mm DC fan, off until heat sinks reach 45°C, then variable speed
2 rear panel attenuators
2 Clip, 2 Status
Temp, DC, turn-on transients, improper load or shorts
8 pin plugable signal input, 4 terminal barrier strip, IEC AC power connector
18 ga. steel reinforced with 12 ga. rack ears
88.4 mm x 483 mm x 347.7 mm, 342.9 mm behind rear mounting ears
(3.48" x 19" x 13.688", 13.5" behind rack ears)
28.3 lbs. (12.84 kg)
23.0 lbs. (10.43 kg)
17
Tabla de contenido
loading

Tabla de contenido