All manuals and user guides at all-guides.com
OBJ_DOKU-31309-001.fm Page 42 Thursday, July 5, 2012 3:50 PM
42 | English
After use replace the blade transport guard.
Recommended times
– Cut hedges with deciduous leaves in June and October.
– Cut evergreen hedges in April and August.
– Cut conifer and other fast growing shrubs approx. every six weeks from
May onwards.
Edging (grass shear only) (see figure D)
Guide the garden product along the edge of the lawn. Do not allow the
blade to contact paved surfaces, stones or garden walls, since this will
wear the blade rapidly.
For larger lawn it is advisable to use the pole cart (available as an accesso-
ry or supplier with "grass shear & pole cart" set).
After use replace the blade transport guard.
Maintenance and Cleaning
Warning! Switch off before adjusting or cleaning. The blades con-
tinue to move for a few seconds after the garden product is
switched off.
Caution! Do not touch the moving blades.
For safe and proper working, always keep the garden product
clean.
Always wear protective gloves when using, adjusting or cleaning
the garden product.
Note: To ensure long and reliable service, carry out the following mainte-
nance regularly.
Regularly check for obvious defects such as loose fixings, and worn or
damaged components.
Check if guards and protective devices are undamaged and properly
mounted. Before using, carry out possibly necessary maintenance and re-
pairs.
F 016 L70 473 | (5.7.12)
Bosch Power Tools