Tabla De Contenido - BIG ASS FANS Essence Guia De Instalacion

General Information
Introduction
Pre-Installation
Mounting Structure:
Bar Joists
Mounting Structure:
Wood Frame
Mounting Structure:
Solid Beam
Hanging the Fan
Installing Guy Wires
Installing Airfoils
Wiring the Fan
All manuals and user guides at all-guides.com
ESSENCE
Contents
Important Safety Information
Reference Guide
Reference Guide: Mounting
Thank You
About Big Ass Fans
About this Fan
What's in the Box
Parts Included
Tools Needed
Alternative Mounting Methods
Fan Diagram
Preparing the Work Site
1. Select Proper Angle Irons
2. Pre-drill Angle Irons
3. Secure Angle Irons (if span is longer than 8 ft)
4a. Fasten Single Angle Irons to Roof Structure Mounting Points
4b. Fasten Double Angle Irons to Roof Structure Mounting Points
1. Identify Mounting Location
2a. Fasten Brackets (to Vaulted Ceiling Beams)
2b. Fasten Brackets (to Floor Joists)
2c. Fasten Brackets (to Ceiling Joists)
1. Pre-drill Suitable Mounting Beam
2. Determine Bracket Orientation
3a. Attach L-Brackets (to Mounting Structure)
3b. Attach L-Brackets (to Mounting Structure with Safety Clips)
1. Route Wiring and Safety Cable into Extension Tube
2. Attach Upper Mount and Upper Mounting Brace (to Extension Tube)
3a. Attach Upper Mount (to Angle Irons)
3b. Attach Upper Mount (to Wood Framing Channels)
3c. Attach Upper Mount (to L-Brackets)
4. Fasten Wood Framing Channels (to Brackets, Wood Frame Mounting Only)
5a. Secure Safety Cable (to Angle Irons)
5b. Secure Safety Cable (to Wood Frame)
5c. Secure Safety Cable (to Solid Beam)
5d. Secure Safety Cable (to Solid Beam with Safety Clips)
6. Secure Safety Cable (to Main Fan Unit)
7. Attach Main Fan Unit (to Extension Tube)
8. Tighten Hardware
9. Connect Power and Wall Controller Wiring
10. Install Cover Plate Assembly
11. Install Lower Cover
1. Attach Guy Wire Clamps
2. Attach Locking Carabiners to Guy Wire Clamps
3a. Attach Beam Clamp (Bar Joist Mounting)
3b. Attach Eyebolt (Wood Frame Mounting)
4. Route Guy Wire through Gripple
5. Install Three Remaining Guy Wires
1. Attach Winglets or Airfoil Tips (to Airfoils)
2. Position Airfoils
3. Attach Airfoils (to Main Fan Unit)
Electrical Safety Information
Power Requirements
Wire Color Chart
WWW.BIGASSFANS.COM ©2013 DELTA T CORP.
®
®
ALL RIGHTS RESERVED
ii
iii
iv
1
1
1
2
3
4
5
6
7
8
9
9
10
11
12
12
13
13
14
14
15
15
16
16
17
18
18
19
20
20
20
21
21
22
22
22
23
23
24
25
25
25
26
26
27
27
28
29
29
29