Installation Steps; Care And Cleaning - LUND Ventvisor Deflector Instrucciones De Instalación

Installation Steps

Align the driver side deflector with the previously
cleaned door frame.
3
With the deflector in its final position, remove remaining
tape liner by pulling on free ends.
5
4 Piece Set
The rear visor mounts to the door frame utilizing the same installation procedure as above.
7

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Lund
and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in terms of
fit, durability, finish and ease of installation.
™
NOTE: Actual application may vary slightly from illustrations.
vertical post
®
branded products offered by Lund International, Inc. We take the utmost pride in our products
Lund International
800-241-7219 • Visit us at lundinternational.com
© 2015 Lund International, Inc. All rights reserved.
Lund and the Lund logo are trademarks of Lund International, Inc.
® ®
Slide the front end flange under the mirror cap.
4
Apply pressure along the flange edges to secure in
6
Repeat steps 1 thru 6 for passenger side front
Repeat for opposite side.
rear visor installed to trim
Page 2 of 2
place.
deflector