Basic Use; Adjusting The Volume - Oglo MS-O-400-D Manual Del Usuario

basic use

Switching the unit on or off
To turn on the micro hi-fi system, plug the end of the power cord into a wall socket.
1.
Press the button on the remote control or on the device. The micro hi-fi system turns on using 2.
the last active source.
To turn off the micro hi-fi system, press the
3.
Your device is equipped with an auto sleep function. If no audio signal is detected for 15
minutes (excluding FM/DAB radio), it will automatically go into standby mode.
Selecting an audio source
Select your playback source by pressing the
button corresponding to the source of your choice on the remote control: DISC, USB, DAB, FM, LINE
IN, BLUETOOTH.

Adjusting the volume

To increase or decrease the volume, turn the volume knob on the front of the micro hi-fi system or
•
press the VOL + and VOL - buttons on the remote control.
To mute the volume, press the
•
button again, press the VOL + and VOL - buttons on the remote control or turn the knob on the
front of the unit.
Changing the sound effects
Press the EQ button on the remote control several times to select the desired sound effect: ROCK, POP,
FLAT, JAZZ or CLASSIC.
Setting the time
When the micro hi-fi system is turned on for the first time, it automatically switches to DAB mode and
starts an automatic search for available stations. The time is set automatically.
You can also manually set the time.
To do this, press and hold the CLOCK button, and then use the number keys (0 to 9). Press the CLOCK
button again to confirm.
Setting a sleep timer
Press the SLEEP button repeatedly to set the time for an auto sleep timer. At the end of this period, the
micro hi-fi system will switch off. Select OFF if you wish to disable this function.
button on the remote control or the unit again.
button on the micro hi-fi system or directly press the
button on the remote control. To turn the sound back on, press the
35