Connecting Dc Power - Rockwell Automation Allen-Bradley PanelView 550 Instrucciones De Instalación

All manuals and user guides at all-guides.com
3. Apply power to the terminal.
Black (Line)
White
(Neutral)

Connecting DC Power

The L1 and L3 versions (e.g., Catalog No. 2711-K5A1L1 or 2711-K5A1L3) of
the PV550 terminals connect to a 24V dc power source.
The table below shows the electrical ratings for the DC versions of the terminals.
Electronic circuitry and an internal fuse protect the terminals from reverse
polarity and over-voltage conditions
Terminal Type
PV550
ATTENTION
!
Power Terminal Block (fixed)
120/240V ac, 3 Wire,
U.S. Color Code
L1
L2 GND
Green
Green
(Earth Ground)
(Earth Ground)
To Power Source
Supply Voltage
18 to 30V dc,
(24V dc nominal)
• Do not connect the PanelView terminal to an AC power
source. Connecting to an AC power source may damage
the terminal.
• The PanelView 550 terminal is designed for safe use when
installed in a suitably rated NEMA Type 12, 13, 4X (indoor
use only), IP54 or IP65 enclosure.
PanelView 550 Terminals
120/240V ac,
3 Wire, European
Harmonized Color Code
L1
L2 GND
Green/Yellow
Brown (Line)
(Protective Earth)
Blue
(Neutral)
To Power Source
Power Consumption
12 Watts maximum
(0.5 Amps @ 24V dc)
13
40061-325-01(D)