For More Information; Hazardous Locations - Rockwell Automation Allen-Bradley PanelView 550 Instrucciones De Instalación

All manuals and user guides at all-guides.com
4 PanelView 550 Terminals

For More Information

For
More detailed information on the 550 and the
other Standard PanelView terminals.
If you would like a publication, you can:
• download a free electronic version from the PanelBuilder32 installation CD
• download a free electronic version from the internet:
www.ab.com/manuals/eoi or www.theautomationbookstore.com
To purchase a publication:
• visit the www.theautomationbookstore.com and place your order
• contact your local distributor or Rockwell Automation Representative

Hazardous Locations

Series C (and higher) terminals are certified for Class I Division 2 hazardous
locations. See nameplate label on terminal for certification details.
ATTENTION
!
Series C terminals have an operating temperature code of T2 (maximum
operating temperature of 300° C or 572° F). Do not install Series C terminals in
environments where atmospheric gases have ignition temperatures less than
300° C (572° F).
40061-325-01(D)
In Class I, Division 2 hazardous locations, the PanelView 550
terminal must be wired per the National Electric Code and/or
Canadian Electric Code as it applies to hazardous locations.
Peripheral equipment must also be suitable for the location in
which it is installed.
Refer to
Standard PanelView
Terminals User Manual
Refer to
2711-UM014A-EN-P