Connecting Dc Power - Rockwell Automation Allen-Bradley PanelView 600 Instrucciones De Instalación

All manuals and user guides at all-guides.com
3. Apply power to the terminal.
120/240V ac, 3 Wire,
U.S. Color Code
L1 L2
Green Green
Black (Line)
(Earth Ground) (Earth Ground)
White
(Neutral)
To Power Source

Connecting DC Power

The L1 versions of the PanelView 600 terminal (Catalog No. 2711-K6C1L1,
-B6C1L1) connect to a 24V dc power source.
The electrical ratings for the PanelView 600 are shown below. Electronic
circuitry and an internal fuse protect the terminal from reverse polarity and over–
voltage conditions.
Terminal Type
PV600
ATTENTION
!
120/240V ac,
3 Wire, European Harmonized
Color Code
L1 L2
Green/Yellow
Brown (Line)
(Protective Earth)
Blue
(Neutral)
Supply Voltage
18 to 32V dc,
(24V dc nominal)
• Do not connect the PanelView terminal to an AC power
source. Connecting to an AC power source may damage
the terminal.
• The PanelView 600 terminal is designed for safe use when
installed in a suitably rated NEMA Type 12, 13, 4X (indoor
use only), IP54 or IP65 enclosure.
PanelView 600 Terminals
Power Terminal
Block (fixed)
To Power Source
Power Consumption
34 Watts maximum
(1.9 Amps @ 24V dc)
13
41061-004-01(D)