Oasis 504815C Guia Del Usuario página 8

6. Assemble the filter as per individual instructions. (Fig. D)
NOTE: Filter set sold separately.
7. The filter bracket has several hole patterns to accommodate different filter mounting configurations.
It may be necessary to provide your own holes per your individual filter instructions.
NOTE: Mounting screws are not included with your cooler.
8. Mount the filters to the filter bracket per individual instructions. (Fig. E)
NOTE: Follow any preflush instructions supplied with your filter set before making any connections
to the water cooler.
9. Connect the water supply tube to the inlet side of the connection fitting, at the rear of the cooler.
And, connect the length of 1/4" tubing from the connection fitting (on the inside of the cooler) to your
filter system. (Fig. F)
10. Connect the 1/4" tube, leading to the water valve (supplied with your cooler) to the outlet side of your
filter system. (Fig. G)
11. Make your external water supply connections.
NOTE: Observe all local and state plumbing codes.
12. Your cooler is equipped with an open-door interlock system that will suspend all cooler functions while
the access door is open. The access door must be shut for the cooler to operate correctly. (Fig. H)
NOTE: Follow start-up instructions at the front of this document.
Filter Bracket
Installation of Filters (Oasis® Green Filter shown)
Fig. E
8
Mounting Screws
Fig. F
Water in (water line)
oasiscoolers.com
Fig. D Oasis® Green Filter
Green Filter replacement media
can be purchased online at
www.oasiscoolers.com
Fig. G
Water out (to cooler)
Fig. H