Tabla de contenido
Mattress Retainer Bar
Locate the mattress retainer bar brackets. Slide the left side of the mattress
retainer bar into the bracket. Pull the retainer bar to the opposite bracket and
secure the right side.
14
Helpful Hints
If one or more functions on the bed base have stopped operating:
• Check under the bed base to verify that the wired connections are secure and that there are no cords or
bedding obstructing the movement of the base.
If the lights on your remote no longer illuminate and will not operate your adjustable bed base:
• Make sure the batteries are installed correctly.
• Install (3) new AAA batteries in the remote.
If all of the remote control buttons illuminate, however nothing on your bed base will operate:
• Check to ensure the green LED light is illuminated on both the control box and transformer. If there is no
light, verify that the input and power cords are properly connected.
• Unplug the base for 1 hour to reset the electronic components.
• Plug bed base into a different electrical outlet, or test current outlet with another working appliance (a
grounded, electrical surge protector is recommended).
• Make sure the frequency switches on the remote and the control box match.
If issue is not resolved by following the instructions above, locate serial number on warranty card or back of
remote and call Ergomotion Customer Service: 1-888-550-3746
15
Tabla de contenido
