HURAKAN HKN-FWP Guia De Inicio Rapido página 8

EN
INTRODUCTION
Dear All,
You have purchased a piece of professional equipment. Prior to commencing operation, you
should read and understand this Certificate and keep it throughout service life of the equip-
ment.
Please keep in mind that observance of the instructions in this Certificate extends the service
life of the equipment and prevents injury of operating personnel.
We hope our recommendations will facilitate operation of the equipment to the fullest.
APPLICATION
The equipment is intended for warming and serving first courses.
TECHNICAL SPECIFICATIONS
Model
Type
Overall dimensions, mm
Generating capacity, kW
Power mains parameters
Case material
Insert capacity, l
Temperature
о range, С
Water filling method
OPERATION PROCEDURE
PRIOR TO FIRST START
1. Clean the equipment in accordance with the instructions in the Maintenance and Care sec-
tion.
SWITCHING THE EQUIPMENT ON
1. Fill the tank with water to the maximum mark (0.6 l).
The equipment is intended for wet warming only. Turning on the equipment without
water in the tank is not allowed.
Overfilling the tank with water is not allowed. The insert shall not float up, even when
empty.
2. Assemble the equipment as follows:
8
HKN-FWP
Desktop
340x340x370
0.4
220/50/1
Porcelain-coated
steel
10.0
adjustment 35 – 95
Manual
HKN-FWP2
Desktop
340x340x360
0.4
220/50/1
Stainless steel
10.0
35 – 95
Manual
HKN-SB57
Desktop
270x270x370
0.3
220/50/1
Porcelain-coated
steel
5.7
35 – 95
Manual