REHANGING THE DOORS
5
5.2 Rehang the freezer door
5.2.1 Lower the freezer door onto the center
hinge pin. Be sure the washer and spacer
are in place on the pin.
Center Hinge Pin
Washer and Spacer
5.2.2 Tilt the door toward the cabinet, lifting the top
hinge so the pin fits into the socket on the top
of the door.
5.2.3 Interchange hinge (and the shim glued to it)
and screws at top right with screws at top left of
cabinet. Do not tighten screws on hinge side at
this time.
Installing the hinge on the left
NOTES:
• Some hinges have four holes. Which holes you
use for installing the hinge depends on which
side you install the hinge.
• The outer edge of the hinge should be parallel
to the edge of the case for correct installation.
Installation Instructions
(CONT.)
Installing the hinge on the right
5.2.4 Make sure the door is slightly above the top of
the cabinet and the gap between the doors is
even across the front. Tighten the top hinge
screws. Do not overtighten these screws—
tighten them until they are just snug, then
turn them another one-half turn.
5.2.5 Install the hinge cap onto the top hinge by
snapping it into place.
13