REMOVE THE FREEZER DOOR
2
(CONT.)
2.3 Lift the hinge (and the shim glued to it)
straight up to free the hinge pin from the socket
in the top of the door and set it aside, along
with its screws.
Top Hinge
2.4 Remove the tape and tilt the door away from the
cabinet. Lift it off the center hinge pin.
2.5 Set the door on a non-scratching surface with
the outside up.
2.6 Transfer the 2 screws from the opposite side
of the cabinet to the screw holes vacated by
the top hinge removal. Transfer the two plug
buttons to the holes where the screws were
removed.
REMOVE THE FRESH FOOD DOOR
3
3.1 Tape the door shut with masking tape.
Installation Instructions
3.2 Using a 5/16" hex-head socket screwdriver and
a 5/16" open-end wrench, remove the two
screws holding the center hinge (and the shim
glued to it) to the cabinet. Lift the center hinge
to free its pin from the socket in the top of the
door, and set hinge and screws aside. Be careful
not to lose the center hinge spacer and washer.
3.3 Remove the tape and tilt the door away from the
cabinet. Lift the door from the pin in the bottom
hinge bracket. (If the washer sticks to the door
bottom, put it back on the hinge.)
3.4 Set the door outside-up on a non-scratching
surface.
3.5 Transfer the two screws from the opposite side of
the cabinet to the screw holes vacated by the center
hinge removal. Transfer the three plug buttons to
the holes where the screws were removed.
11