Optional Casters - Uline H-8182 Manual De Instrucciones

π
CHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA
PAGE 5 OF 15

OPTIONAL CASTERS

Figure 10
Nylon Bushing
Rubber
Expansion Piece
Caster Base
Figure 11
Tube Leg
Figure 12
1-800-295-5510
1. Flip the cabinet onto its back on a smooth,
non-marring surface. Place flat head screwdriver
in between leg and foot. Gently tap end of flat
head screwdriver with a rubber mallet to remove
adjustable feet from tube legs. (See Figure 10)
2. Hold caster base and rotate nylon bushing
clockwise. This will cause the rubber piece to
expand. (See Figure 11)
3. Expand the rubber enough so that it will fit snugly
into the tube leg.
4. With caster fully inserted into the leg, turn clockwise
until caster is secured to tube leg. (See Figure 12)
NOTE: If too loose, pull out caster and tighten
further. Repeat step 2.
uline.com
0220 IH-8182