Uline H-8182 Manual De Instrucciones página 4

Door
Slide
Doors
PAGE 4 OF 15
ASSEMBLY CONTINUED
8. Place back panel onto shelf with lip facing down
Back
Panel
Figure 7
9. Place door slide between side panels at front
Figure 8
10. Install left sliding door into rear track first by
11. Install right sliding door into front track by inserting
Figure 9
and out. Attach to side panels with six large Phillips
head bolts. Attach to side of lower shelf with three
Phillips head sheet metal screws and three washers,
and to center of the top with one Phillips head sheet
metal screw and one washer. (See Figure 7)
of cabinet and line up with pre-threaded holes.
Attach to cabinet shelf with three small Phillips head
bolts. (See Figure 8)
inserting top of door into back slit in door bracket,
then insert bottom of door on to door slide.
(See Figure 9)
top of door into front of door bracket, then insert
bottom of door on to door slide.
0220 IH-8182