Optional Casters - Uline H-6256 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

PAGE 3 OF 9

OPTIONAL CASTERS

Figure 6
Nylon Bushing
Rubber Expansion
Piece
Caster Base
Figure 7
Figure 8
Tube Leg
1-800-295-5510
uline.com
1.
Flip the table back over onto a smooth, non-marring
surface. Remove adjustable feet from legs using a
flat head screwdriver. (See Figure 6)
NOTE: You may need to use a rubber mallet or
hammer to assist.
2. Hold caster base and rotate nylon bushing
clockwise. This will cause the rubber piece to
expand. (See Figure 7)
3. Expand the rubber enough so that it will fit snugly
into the tube leg.
4. With caster fully inserted into the leg, turn clockwise
until caster is secured to tube leg. (See Figure 8)
NOTE: If too loose, pull out caster and tighten
further. Repeat step 2.
0521 IH-6256
Tabla de contenido
loading

Este manual también es adecuado para:

H-6257H-6258

Tabla de contenido