Scale Check - Mettler Toledo BBA242 Instrucciones De Manejo

6
03/10 Order number 72227280

Scale check

The scale check function is a quick way to check whether the scale
operates within acceptable tolerances.
1. In simple weighing mode press
menu.
2. Select "Scale Check" using
check.
3. When the message "Unload scale" appears, make sure that the
scale is empty and press
When a weight value is displayed the scale asks for the test
weight.
4. Place the test weight you have received with the scale on the
scale. The test weight must be clean and free from paint or other
residues.
5. Check that the correct test weight is shown on the display and
press to continue.
If the scale operates within the tolerances, the message "Scale is OK"
will be shown.
➜ Press to go back to standard weighing operation.
If the scale operates outside of the tolerances, the message "Scale is
out of tolerance" will be shown.
1. Press to go back to standard weighing operation.
2. Repeat the scale check function by pressing
• If the scale still operates out of tolerance, contact the supplier of the
scale or the designated support contact.
• The test weight and the acceptable tolerances can be adjusted in
the scale configuration menu (see page 22).
to enter the mode selection
and press to enter the scale
.
again.
User Manual BBA242 / BBA242x / BBA242xx
METTLER TOLEDO
19