Troubleshooting Guide - Ovention Matchbox M1313 Manual De Instalación Y Operación

TROUBLESHOOTING GUIDE

WARNING
This unit must be serviced by qualified personnel only.
Service by unqualified personnel may lead to electric
shock or burn.
Symptom
Oven does not operate
(blank touchscreen).
Irregular slider movement.
Improper cooking of food.
CHECk FaNS indicator
light is on (located on front,
right side of oven chamber).
CHECK FANS Check Fan
Indicator Light Indicator Light
Oven not heating.
Temperature
High Limit
Reset Button
NOTE: To locate an Authorized Ovention Service Agent, access
the Ovention website at www.oventionovens.com and
select the Service & Support tab, or call the Ovention
Hotline at 855-298-OVEN(6836).
All manuals and user guides at all-guides.com
Probable Cause
Standby switch turned
Disconnect turned OFF (O), or unit
unplugged.
Unit connected to incorrect power supply. Refer to SPECIFICaTIONS section for unit electrical
Loose screw and/or bracket.
malfunction of gear and/or slider system.
Incorrect software installed on oven
operating system.
Incorrect setpoint temperature or menu
item selection.
Jet plate or air flow malfunction.
ambient air temperature is over 95°F
(35°C).
air filters are dirty.
Cooling fan(s) malfunction.
Temperature High Limit switch has
tripped.
ELECTRIC SHOCK HAzARD: Turn off Standby switch,
allow unit to cool, and unplug unit/turn OFF Main
Disconnect switch before performing any cleaning,
adjustments, or maintenance.
off, main make sure unit is plugged in, main Disconnect switch
is in ON (I) position (model m1718 only), and Standby
switch is moved up to the "On" position.
specifications. Contact a qualified electrician to
determine and install proper voltage and size electrical
receptacle.
Check all screws on slider system. Tighten screws, if
necessary.
Contact authorized Service agent or Ovention
for assistance.
Contact authorized Service agent or Ovention Hotline
for assistance.
Verify desired setpoint temperature and menu item
selection. Change to proper settings, if necessary
(refer to OPERaTION section).
Contact authorized Service agent or Ovention Hotline
for assistance.
Light will illuminate in ambient temperatures over
120°F (49°C). Verify light shuts off after ambient
temperature drops below 120°F (49°C) consistently. If
not, see "Probable Causes" listed below.
Check air filters and clean, if necessary. Refer to
"monthly Cleaning" procedure in maINTENaNCE
section.
Contact authorized Service agent or Ovention Hotline
for assistance.
Press the Temperature High Limit Reset Button
located on the rear, left side of the oven chamber near
the main Disconnect switch. If switch continues to trip,
contact authorized Service agent or Ovention Hotline
for assistance.
16
English
WARNING
Corrective Action
®
Form No. OVmm-0116
Hotline