Using The Product As Intended; Safety Notes; Important Notes; Contents - marklin BR 216 Manual Del Usuario

1. Using the Product as Intended

This locomotive is to be used only with an operating system
designed for it (Märklin AC, Märklin Delta, Märklin Digital or
Märklin Systems).

2. Safety Notes

Make sure you read the following safety notes before using
this Märklin product for the first time.
• Use only switched mode power supply units and transfor-
mers that are designed for your local power system.
• This locomotive must never be supplied with power from
more than one transformer.
• Pay close attention to the safety notes in the
instructions for your operating system.
• The feeder track must be equipped to prevent interference
with radio and television reception, when the locomotive is
to be run in conventional operation. The 74046 interference
suppression set is to be used for this purpose.
• WARNING! Sharp edges and points required for operation.
• Do not expose the model to direct sunlight, extreme
changes in temperature, or high humidity.

2.1 Important Notes

• The operating instructions and the packaging are a
component part of the product and must therefore be kept
as well as transferred along with the product to others.
• Maintenance, servicing, and repairs may only be done by
adults.
• Please see your authorized Märklin dealer for repairs or
spare parts.
All manuals and user guides at all-guides.com
• The warranty card included with this product specifies

3. Contents

4. Functions

• Recognition of the mode of operation: automatic.
• Addresses that can be set:
• Address set at the factory: 72
• Adjustable acceleration/braking delay (simultaneous)
• Setting the locomotive parameters (address, accelerati-
• Headlights, changing over with the direction of travel.
• Only the train control functions and headlight changeover
Märklin Start up can be added to and expanded with Märklin
H0 or Märklin Digital. See your authorized Märklin dealer for
advice.
the warranty conditions.
1 x Locomotive
1 x Set of instructions for use
1 x Warranty card
1-80 (Control Unit 6021/Mobile Station 60651/652)
1-255 (Central Station 6021x/Mobile Station 60653)
(ABV). Adjustable maximum speed.
on/braking delay, maximum speed): with the Control Unit,
Mobile Station, Central Station.
feature are available in analog operation.
7