B-Fcx624-E - Dell PowerConnect B FCX Serie Guía De Introducción

•
The B-FCX648-E switch has forty four 10/100/1000 Mbps RJ45 ports plus four Combo 1 Gbps ports.The front
panel has a slot for an optional four-port 1GbE SFP module (works as Combo port) or four-port 10 Gbps SFP+
module. On the rear panel a removable fan tray provides a cooling airflow from the front to the rear of the
device. Two rear-panel power supply receptacles accommodate up to two power supply units that also support a
front-to-rear cooling airflow.
•
The B-FCX648-I switch has forty four 10/100/1000 Mbps RJ45 ports plus four Combo 1 Gbps ports.The front
panel has a slot for an optional four-port 1GbE SFP module, (works as Combo port) or four-port 10 Gbps SFP+
module. On the rear panel a removable fan tray provides a cooling airflow from the rear to the front of the
device. Two rear-panel power supply receptacles accommodate up to two power supply units that also support a
rear-to-front cooling airflow.
•
The B-FCX648-S stackable switch has forty four 10/100/1000 Mbps RJ45 ports plus four Combo ports, which
include four 10/100/1000 Mbps RJ45 ports and four 100/1000 Mbps SFP ports. Two rear-panel power supply
receptacles allow for up to two power supply units. Two dedicated 16 Gbps Ethernet CX4 ports on the rear panel
allow stacking for up to eight units. The front panel also has a module slot for an optional two-port 10 Gbps
Ethernet XFP module.
NOTE
All B-Series FCX models support Layer 2 and Enterprise Layer 3 protocols (RIP, OSPF, PIM). FCX models can be ordered
from the factory as -ADV (Advanced Layer 3) models, which adds support for the Layer 3 BGP routing protocol.
Please note the following when installing B-Series FCX devices:
•
Each model can be installed on a desktop or standard 19-inch. equipment rack.
•
The basic configuration steps required to set up the PowerConnect™ B-FCX Series are listed in this guide. For
detailed installation, configuration, and operating instructions, refer to the appropriate hardware installation
guide for this product.
•
For the B-FCX624-E, B-FCX624-I, B-FCX648-E, and B-FCX648-I devices, be sure that the airflow direction of the
power supply unit matches that of the installed resilient quad-fan tray. The power supplies and fan trays are
clearly labeled with either a green arrow with an "E", or an orange arrow with an "I" as shown in the following
table.
Device Label on required power supply
B-FCX624-E and
B-FCX648-E
B-FCX624-I and
B-FCX648-I
4
All manuals and user guides at all-guides.com
WARNING
POWER SUPPLY/FAN
FRU TYPES MUST
E
BE THE SAME
AIRFLOW
WARNING
POWER SUPPLY/FAN
FRU TYPES MUST
BE THE SAME
AIRFLOW
Label on required fan tray
E
AIRFLOW
AIRFLOW
PowerConnect B-Series FCX/FCXS Getting Started Guide
53-1002049-01