Tabla de contenido
CONSOLE SET UP
access
maintenance mode
screen 1
product information
screen 2
active time out
screen 3
summary mode time
screen 4
select machine type
screen 5
select units
screen 6
ANT +
screen 7
HIITMILL CALIBRATION
screen 8
SOFTWARE UPDATE
exit
maintenance mode
within 15 seconds of console wake - up
Press UP + DOWN + TIME SIMULTANEOUSLY TO ENTER MAINTENANCE MODE
PRESS UP + DOWN BUTTONS TO ACCESS MAINTENANCE SCREENS
CUMULATIVE HOURS AND DISTANCE
SOFTWARE VERSION
PRESS TIME BUTTON TO ADJUST
DEFAULT 30 SECONDS
PRESS TIME BUTTON TO ADJUST
DEFAULT 15 SECONDS
PRESS TIME TO TOGGLE THROUGH
P1 TREAD (HIITMILL)
P2 BIC 1 (HIITBIKE / AIRFIT)
P3 ERGO (HIIT UBE)
P4 STEP
P5 BIC 2 (AIRFIT GEN 1)
P6-P9 NONE
PRESS DISTANCE BUTTON TO CHANGE UNITS
PRESS BLUETOOTH BUTTON TO TURN ANT+ ON OR OFF
FOR THE HIITMILL ONLY
PRESS RESISTANCE LEVER TO THE FORWARD MOST POSITION
PRESS TIME BUTTON TO SET ANGLE TO ZERO
ONLY IF RECOMMENDED BY STAIRMASTER
INSERT USB DRIVE LOADED WITH SOFTWARE INTO SLOT ON RIGHT SIDE OF CONSOLE
PRESS CALORIE BUTTON
WAIT FOR COUNT UP
REMOVE USB
PRESS enter to exit maintenance mode
read owner's manual for complete instructions + safety warnings
20
Tabla de contenido
