Care And Maintenance - Homewerks 10-B82-SACH-B Manual De Instalación

ASSEMBLY INSTRUCTIONS
9. HANDLE INSTALLATON:
A. After finishing the wall surface,
slide flanges (9A) onto valves and
fit flush against the finished wall.
B. Install the handle assemblies (9B)
as shown.
TROUBLESHOOTING
PROBLEM: Leaks from spout
CAUSE: Damaged or dirty valve seat.
ACTION: Remove faucet handle, cartridge, housing and valve spool to check
the rubber valve seal. Clean it or replace by calling Customer Service

CARE AND MAINTENANCE

Clean periodically with a soft cloth. Avoid abrasive cleaners, steel wool, and harsh chemicals as these will dull the finish and void your warranty.
ROUGH-IN
www.homewerksww.com
9
9A
9A
9B
9B
PROBLEM: Leaks from under handle
CAUSE: Bonnet is loose or bottom gasket on cartridge is dirty or
twisted.
ACTION: Remove faucet handle. Tighten the bonnet. Clean or replace
O-ring.
3