Reversing The Door Swing - Telstar TRS14005MD Manual De Instrucciones

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

11.
Do not use an extension cord with this appliance. If the power cord is too short, have a qualified electrician
or service technician install an outlet near the appliance. Use of an extension cord can negatively affect the
performance of the unit.
IT IS HAZARDOUS FOR ANYONE OTHER THAN AUTHORISED SERVICE PERSONNEL TO CARRY OUT SERVICING OF
REPAIRS WHICH INVOLVE THE REMOVAL OF COVERS.
TO AVOID THE RISK OF AN ELECTRICAL SHOCK DO NOT ATTEMPT REPAIRS YOURSELF.
2. INSTALLTION
2.1 Loca on
When selec ng a posi on for your unit you should make sure the floor is flat and firm, and the room is well ven
lated. Avoid loca ng your unit near a heat source, e.g. cooker, boiler or radiator.
Also avoid direct sunlight as it may increase the electrical consump on. Extreme cold ambient temperatures
may also cause the unit not to perform properly. This unit is not designed for use in a garage or outdoor installa
on. Do not drape the unit with any covering.
When installing the unit, ensure that 20 cm of free space is le at both sides, 15 cm at the rear and 20 cm at the
top of the unit. This will allow cold air to circulate around the wine cooler and improve the efficiency of the
cooling process. The door can be opened to the right or the le depending on what be er suits the loca on.
Please ensure there is adequate space for the door to fully open.

2.2 Reversing the Door Swing

Tools Required: Phillips style screwdriver / Flat blated screwdriver / Hexagonal spanner
• If you want to have the door swing reversed, we recommend that you contact a qualified technician.
You should only try to reverse the door yourself if you believe that you are qualified to do so.
• Ensure the unit is unplugged and empty.
• Adjust the two levelling feet to their highest posi on.
• To take the door of it is necessary to lt the unit backwards. You should rest the unit on something solid
so that it will not slip during the door reversing process.
• All parts removed must be saved to do the reinstalla on of the door.
• Do not lay the unit fat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
13
Semi Automatic Refrigerator
TRS14005MD
Tabla de contenido
loading

Tabla de contenido