Call Settings; Connection - Nokia N75 Manual Del Usuario

Call settings

Send my caller ID—To set your phone number to be
displayed or hidden from the person to whom you are
calling, select Yes
network operator or service provider when you make a
subscription (Set by
Call waiting—Activate this setting if you want the network
to notify you of a new incoming call while you have a call in progress. To set the function on or off, select
or Cancel. To check whether the function is activated,
select Check status.
Reject call with SMS—Select
to a caller informing why you could not answer the call.
See "Answer or decline a call," p. 69.
Message text—Write a text to be sent in a text message
when you decline a call.
Automatic redial—Select On, and your device makes a
maximum of 10 attempts to connect the call after an
unsuccessful call attempt. To stop automatic redialing,
press .
Summary after call—Activate this setting if you want the
device to briefly display the approximate duration of the
last call.
90
or No. The value may be set by your
network) (network service).
Yes to send a text message
Speed dialing—Select On. To dial the numbers assigned to
the speed dialing keys (
See also "1-touch dial a phone number," p. 68.
Anykey answer—Select On. To answer an incoming call,
briefly press any key, except
Line in use—This setting (network service) is shown only if
the SIM card supports two subscriber numbers, that is, two
phone lines. Select which phone line you want to use for
making calls and sending text messages. Calls on both lines
can be answered irrespective of the selected line. If you
Activate
select Line 2
service, you will not be able to make calls. When line 2 is
selected, is shown in the standby mode.
Tip! To switch between the phone lines, press and
hold
Line change—To prevent line selection (network service),
select Disable
this setting, you need the PIN2 code.

Connection

Data connections and access points
Your device supports packet data connections (network
service), such as GPRS in the GSM network. When you use
your device in GSM and UMTS networks, multiple data
— ), press and hold the key.
, ,
and have not subscribed to this network
in the standby mode.
if supported by your SIM card. To change
, and .