3-D Tones; Offline Profile - Nokia N75 Manual Del Usuario

If you want the caller's name to be said when your device
rings, select Options
name to On. The caller's name must be saved in Contacts.
To create a new profile, select

3-D tones

3-D tones enable three-dimensional sound effects for your
ringing tones (not all ringing tones support
Press , and select
To enable 3-D tones
ringing tones > On.
To change the three-dimensional effect for a ringing tone,
do the following:
1 Select Ringing tone
to change.
2 Select Sound trajectory
Trajectory speed—Scroll left or right to adjust the speed
at which sound moves from one direction to another.
This setting is not available for all ringing tones.
Doppler effect—Select
to appear to change as you get closer to the device, or
further away from it. The ringing tone appears to become
higher as you get closer to the device, and to become
lower as you get further away. This setting is not
available for all ringing tones. The Doppler effect is not
available for all sound trajectories.
Reverberation—Select the reverb type.
86
> Customize, and set Say caller's
Options > Create
3-D
Tools > 3-D tones.
for all your ringing tones, select
and the ringing tone you want
and from the following settings:
On if you want the ringing tone
To listen to the ringing tone with the three-dimensional
effect, select Options
the stereo loudspeakers on your device, or a stereo headset.
new.

Offline profile

The Offline profile lets you use the device without connecting
to the wireless network. When you activate the
tones).
profile, the connection to the wireless network is turned off,
as indicated by
3-D
wireless RF signals to and from the device are prevented. If
you try to send messages, they are placed in the outbox to be
sent later. If a Bluetooth connectivity is activated before
entering the Offline
Warning: In the Offline profile you cannot make
(or receive) any calls, except make calls to certain
emergency numbers, or use other features that
require network coverage. To make calls, you must
first activate the phone function by changing
profiles. If the device has been locked, enter the
lock code.
To leave the Offline
another profile. The device re-enables wireless transmissions
(providing there is sufficient signal strength). If a Bluetooth
connectivity was activated before entering the
profile, it is automatically reactivated after leaving the
Offline profile. See "Settings," p. 88.
> Play tone. To listen to 3-D
in the signal strength indicator area. All
profile, it will be deactivated.
profile, press the power key, and select
tones, use
Offline
Offline