Idiomas disponibles
Idiomas disponibles
EN | GYROSCOPIC RF REMOTE CONTROL
The RF remote control METRONIC is provided with
a gyro to move the pointer simply by directing the
remote at the screen. For example, if you move
slightly forward end of the control up, the pointer
on the screen will move up, and so in all directions.
The controller works as a left mouse click, right click
and a pointer, as in a computer.
Remote control works with 2 AAA 1.5V batteries.
Respect polarity shown on the battery compart-
ment. In order to respect the law, never throw batte-
ries with the regular trash. Must deliver them to their
point of sale, where you will find special containers.
How to install:
- Open the battery compartment and remove the
USB receiver and then insert 2 AAA batteries with
right polarities.
- Plug the USB receiver in a available input in the
device (box IP, tablet Android or computer.
NOTE: To open the battery compartment, press
the center of the cover and drag.
Switch RF function to IR function:
· 1 Press the TV button. The green LED flashes
once: the remote is in RF function. In this mode, the
functions do not work for the TV mode.
· 2 Press the TV button. LED flasches once: the re-
mote is in IR function to be used with a TV.
The RF function is used in Android and Windows
mode. IR is used to used the remote control as a
universal remote control for TV
Learning function in IR mode:
NOTE: place the two control (original and re-
mote control 441267) with infrared sensors face
to face in order to start learning.
· 1 Press TV button 2 seconds to switch to IR mode.
Red LED turns on.
· 2 Press the key you want to synchronize. The red
LED flashes very fast, now press the button on the
original remote to synchronize.
· 3 LED turns off first. Then will flash 3 times and
will turn on.
· 4 Repeat steps 2 and 3 to synchronize other keys.
· 5 Press TV button to save changes and quit lear-
ning function.
NOTE: all keys can be syncronized in IR mode
from remote control, except
1
3
Synchronization:
6
NOTE: keep the remote close to the RF module.
· Press TV button to switch to RF mode.
· Press OK and arrow for 2 seconds and hold until
the green LED lights.
9
· Insert RF module in a USB device plug.
· Synchronization starts.
· Synchronization finishes when green LED flashes
3 times and turns off.
· If the synchronization was unsuccessful, the re-
mote control will turns off after 30 seconds.
Remote auto power off :
· The remote will change in standby mode if not use
4
for 30 seconds.
· Press any key to re-activate remote control.
Mouse function:
1
2
4
· To use remote as a mouse, functions are :
3
5
OK key
Left button
6
Key
7
Right button
1
8
· The mouse function is turned off by default when
3
the batteries are inserted.
9
· Press
to open or close mouse function
6
10
9
4
4
4
1
1
1
3
2
3
,
and
.
3
5
6
2
6
6
7
5
8
7
9
9
8
9
10
10
10
1
2
2
TV key
5
4
3
7
4
8
4
GAME key
1
1
5
3
3
1
6
6
6
3
10
6
7
9
9
Directional
8
keys
9
9
OK key
10
VOL+/- key
4
2
2
Minibox has two types of switched off.
5
1 Total turn off
5
• Pressing the remote control standby button
7
the Minibox switches to Total Power Off mode.
7
• To restart will be necessary to disconnect the
8
power supply connector and reconnect it.
8
2 Partial turned off
• Enter Settings / lower icon switched off /
confirm menu
• To turn on, press twice the remote control
standby button. In this moment, press once
the remote control standby button. The Mini-
box will be in total power off mode.
10
To restart the device :
• Go to Settings menu, and select backup.
• Click Factory data restore.
• Confirm by clicking the Reset tablet button
below, and reconfirm by pressing Clear All.
• The Minibox will turn off. Disconnect the
power supply and reconnect. After a few se-
conds, the device shows a «erasing» mes-
sage. Once this message disappears dis-
connect and reconnect the Minibox. Then,
the device will restart with original factory
settings.
Turn on / off the device
key
Switch between RF and IR mode
4
Back to home screen
key
Turns off the pointer function to use the controller on games
that need gyro. Only available for tablets with Android opera-
ting system (check user manual device)
2
2
Not available in this model
5
key
5
2
7
Open / close mouse function
7
key
5
8
8
Back to previous screen. In mouse function, right button
7
key
8
Move the cursor (left, right, up, down)
Confirm the selection
10
10
Volume up / down
10
Ref. : 441267 ES336
