Setting Before Use; Opt" Advanced Menu; Unit" Unit Of Measure; Programming - ARAG 4668 Guía De Instalación, Uso Y Mantenimiento

4

settinG Before Use

4.1

"OPT" Advanced menu

Fig. 3
4.2

"UNIT" unit of measure

It is possible to choose the units of measurement to use for viewing data:
EU = Europa (bar) [Predefined setting]
US = USA (psi)
Fig. 4
Access the "OPT" Advanced menu as shown in Par. 4.1.
1) The display alternatively flashes the set unit of measure and the screen "UNIT".
2) To modify the value, keep the keys pressed simultaneously until the "SET" screen appears.
3) Press to select the unit of measure you wish to use.
4) To confirm the setting, keep the keys pressed simultaneously until the "SAVE" screen appears.
The display alternatively flashes the set unit of measure and the screen "UNIT".
5

proGrAMMinG

5.1

Setting the full scale

Before starting the job, it is necessary to input some values concerning the machine, which are
crucial for correctly displaying data during operation:
• Pressure transducer full-scale value (0,1 ÷ 999,9 - EU: bar - US: psi)
Fig. 5
1) After having been turned ON, the device displays the instantaneous pressure value.
2) To modify the value, keep the keys pressed simultaneously until the "SET" screen appears.
3) Set the full-scale value of the pressure transducer using [TOT] key to increase it and [RESET]
key to decrease it; keep the keys pressed to enable quick-modification.
4) To confirm the setting, keep the keys pressed simultaneously until the "SAVE" screen appears.
After installing the device on the machine, it is necessary to set it up in order
to correctly view job data:
• Unit of measure
To access the Advanced menu keep the key pressed while switching ON
the device until the "OPT" screen appears.
12