Airzone KNX- Manual De Instalación página 30

Object number
Name
Function
Description
Possible values
Type of access to the Bus
Data point identification
Object number
Name
Function
Description
Possible values
Type of access to the Bus
Data point identification
Object number
Name
Function
Description
Possible values
Type of access to the Bus
Data point identification
Object number
Name
Function
Description
Possible values
Type of access to the Bus
Data point identification
30
6
VENTILATION mode
On/Off
This communication object allows activating/deactivating the AC unit operation mode
that is connected to system 1, switching to the VENTILATION mode when the object
value is 1 and returning to the mode active in system 1 in case the mode value is 0.
0 → Ventilation mode Off; 1 → Ventilation mode On
Reading/Writing
1.001
7
COMBINED HEATING mode
On/Off
This communication object allows activating/deactivating the AC unit operation mode
that is connected to system 1, switching to the COMBINED HEATING mode when the
object value is 1 and returning to the mode active in system 1 in case the mode value
is 0.
This mode can only be activated when the zone is configured as "Combined", radiant
with air (A/R).
0 → Combined Heating mode Off; 1 → Combined Heating mode On
Reading/Writing
1.001
8
DRY mode
On/Off
This communication object allows activating/deactivating the AC unit operation mode
that is connected to system 1, switching to the DRY mode when the object value is 1
and returning to the mode active in system 1 in case the mode value is 0.
This mode can only be activated when it is available by the machine that is connected
to the system.
0 → Dry mode Off; 1 → Dry mode On
Reading/Writing
1.001
9
RADIANT COOLING mode
On/Off
This communication object allows activating/deactivating the AC unit operation mode
that is connected to system 1, switching to the RADIANT COOLING mode when the
object value is 1 and returning to the mode active in system 1 in case the mode value
is 0.
This mode can only be activated when it is available by the machine/module that is
connected to the system.
0 → Radiant Cooling mode Off; 1 → Radiant Cooling mode On
Reading/Writing
1.001