Setting Up And Configuration; General Recommendations - Airzone KNX- Manual De Instalación

4. SETTING UP AND CONFIGURATION

This device is totally compatible with KNX since it is possible to carry out configuration and
setting up by means of ETS tool.
To carry out device configuration and setting up, access the download section from:
http://doc.airzone.es/producto/actuales/Airzone/Comunes/Softwares/BBDD_KNX-AZ_Fw20.rar
That data base installation in ETS tool will be made according to the usual procedure for
importing new products.
Note: For more information about the setting up of KNX products from ETS, please refer to the document "KNX
Project Design with ETS: Advanced"

4.1. General recommendations

Before beginning with the setting up, take these recommendations into account for its proper
operation of the KNX-Airzone gateway:
- Currently, it will be necessary to address the zoning system before beginning the
setting up from ETS for its integration with KNX devices available on the network.
- Do not make associations with the communication objects that will not be used in
KNX project. The number of associations is limited to 250.
- Make device parameter settings by selecting the used system topology and the
corresponding values for the parameters that are adapted to the peripheral device
24
.