Fujitsu KVM Serie Manual Del Usuario página 21

change the flag color, opacity, display time and location on the desktop. The
following table describes each status flag.
Table 3.5: OSD Interface Status Flags
Flag
To access the OSD interface Flag dialog box:
1. Activate the OSD interface and click Setup - Flag to open the Flag dialog box.
To determine how the status flag is displayed:
1. Select Name or EID to determine what information will be displayed.
2. Select Displayed to activate the flag display. After a switch, the flag will
remain on the screen until the user switches to another device. Selecting
Timed will cause the flag to display for five seconds when a switch is made
and then disappear.
3. Select a flag color under Display Color. The following flag colors are
available:
• Flag 1 - Gray flag with black text
• Flag 2 - White flag with red text
• Flag 3 - White flag with blue text
• Flag 4 - White flag with violet text
4. In Display Mode, select Opaque for a solid color flag or Transparent to see
the desktop through the flag.
5.
To position the status flag on the desktop:
a. Click Set Position to gain access to the Position Flag screen.
b. Left-click on the title bar and drag to the desired location.
c. Right-click to return to the Flag dialog box.
Changes made to the flag position are not saved until you click OK in the Flag dialog box.
590-1035-640A
Description
Flag type by name
Flag type by EID number
Flag indicating that the user has been disconnected from all
systems
3.2 Setup Dialog Box Functions
15