Fujitsu KVM s4-0812 Guía De Instalación Rápida

The following instructions will help you install
and use your switch easily.
Should you require further assistance, please
consult your installer/user guide.
Connecting the local port
1
Connect your VGA monitor and USB keyboard and
mouse cables into the appropriate ports on the KVM
s4 switch.
Connecting a CAT 5 adapter cable to
2
the KVM s4 switch
Connect one end of a CAT 5 cable (4-pair, up to 150 ft/45 m)
into an available numbered port on the rear of
your switch. Connect the other end into the RJ-45
connector of the CAT 5 adapter cable.
Connecting a target device to a CAT
3
5 adapter cable
Connect a CAT 5 adapter cable into the appropriate
port on the back of a target device. Repeat steps 2
and 3 for all target devices you want to connect.
Connecting network users
4
Connect a customer supplied CAT 5 cable from the
Ethernet network into a LAN port on the back of
the switch. Network users will access the switch
through this port.
Connecting to an external modem
5
(optional)
The switch may also be accessed using an ITU V.92,
V.90 or V.24-compatible modem. Connect one end of
a CAT 5 cable into the MODEM port on the switch.
Connect the other end into the CAT 5 to DB-9 (male)
adapter, which then connects into the appropriate
port on the back of the modem.
Fujitsu Technology Solutions GmbH, User Documentation, 33106 Paderborn, Germany • Email - [email protected]
All hardware and software names used are trademarks of their respective manufacturers.
All manuals and user guides at all-guides.com
installation
Quick Installation Guide
KVM s4 Switch
KVM s4-0812 | KVM s4-1622 | KVM s4-3242
KVM s4 switch configuration
Ethernet
4
Local USB Connections
CAT 5
Telephone
Adapters
network
Modem
1
Online - http://ts.fujitsu.com/support
l
4
3
Target
devices
2
KVM s4 Switch
(KVM s4-3242 shown)
590-1057-640A