JANE Montecarlo Manual De Instrucciones página 15

In some cars, the safety belt clasp might be in a very high
position and may come into contact with the edge of the
booster seat, making this position unsafe. In this case, try
moving the car seat forwards or installing it on another
seat. If you have any doubts, contact JANÉ (0a).
Not all safety systems are exactly the same, so we
recommend that you try the MONTECARLO in the car in
which it is going to be assembled.
It is extremely important not to use second-hand products,
as JANÉ, S.A. can only guarantee the complete safety of
articles used by their initial buyer.
JANÉ, S.A. recommends that you replace your
MONTECARLO seat with a new one when it has been
subjected to violent twisting following an accident.
Ensure that all the belts are in their correct position and
are duly adjusted to your child. Make sure that no belts are
coiled up. You must make your child understand that under
no circumstances must they handle the belts or their clasps.
0A
The MONTECARLO seat has been designed for use in a car,
so it must not be used outside it.
For more information on how to use and install the
MONTECARLO, please go to our website at www.jane.es.
15