THOMSON VS 540 Manual De Instrucciones página 7

VS540CA 26/04/01 17:23
Installation of transmitter
1. Place the transmitter (1) near the source equipment (VCR player, DVD player, etc.)
from which you want to transmit video or audio output, and connect it with the
two cords (2 A and 2 B) making sure you respect the color coding of the 3 cinch
plugs (red and white for audio, yellow for video). Connect the TV set to a suitable
outlet from the VCR player or DVD player (AV1).
Obtain a (non-supplied) SCART-TV set connector and connect the TV set to the 2B
adapter already connected to the VCR player or DVD player as shown on Page 7
(see item marked
2. Carefully extend the antenna of the transmitter (1) and orient it towards the room
where your second TV set (TV2) is located. Turn on (position ON) the transmitter
and receiver, using the ON/OFF switch located on its lower side. Place the
channel selectors of the transmitter and the receiver on the same channel (same
letter).
3. Fit the lead (4) following these stages:
- connect the jack plug to the IR EXTEND socket,
- unwind the lead and place one cell near the infrared window of the unit to be
operated (video recorder or other),
- after installing the receiver (see Page 9), ask someone to use the remote control of
that equipment item to be controlled from the room where the second (TV2) is
located,
- by moving the cell around in front of the unit to be operated you will find the
location that permits its control from the other room. You must fix the cell in that
position. Usually, this will be a more or less large, transparent area located on the
front of the unit.
4. Remove the protective self-adhesive film from the infrared cell of cord (4) and affix
it to the infrared-sensitive panel of the equipment to be remote controlled. The
cordon has 3 cells in order to let you play video and audio from 3 equipment items
connected to the (TV1) set (see Diagram 2 on Page 13).
5. Fit the mains supply lead (3) to the transmitter and plug it into a 220/240 V ~ 50 Hz
mains power supply.
Page 6
All manuals and user guides at all-guides.com
on Page 7).
*
6
- VS 540