Tabla de contenido
Idiomas disponibles
Idiomas disponibles
VS540CA
26/04/01 17:23
VS 540 -
several units
If you have several equipment items (VCR player, satellite receiver, DVD player, etc.)
in your main equipment room and want to transmit and receive audio and video
signals to a second TV set, connect your equipment items as shown in the Diagrams
on following pages. Usually, the units are connected in series, the last unit having a
free scart connection that you can use for the connection of the transmitter.
! These diagrams represent some connection possibilities the operation of which depends on
the type of unit, its sockets and the signals it produces. There exist other connections that
you might perhaps wish to try if diagrams 1 to 3 here are not satisfactory. If this is the case,
ask your dealer for assistance.
! As a general rule, remember to switch off units not in use. Also, refer to the manufacturers'
instructions to see if there are any particularities regarding connection or use. Certain units
may need to have their input scart connection "programmed".
! In all cases the transmitter must be connected to a scart connection that produces an Audio-
Video signal Out. Refer to the manufacturer's instructions for confirmation of this.
Page 12
All manuals and user guides at all-guides.com
Relay of pictures from
12
Tabla de contenido
