Setting Items - Oki H2P-74S Guía De Consulta Rápida

Setting items

INK MENU
Menu
#SET INK SUPPLY(ml)
#CCC:XXXX >
#REMAINING INK
>XX. XL
#EXTEND INK AMOUNT
>
#READ EXTENSION CHIP
>
#SUPPLY SUBCART INK
>
MEDIA MENU
Menu
ROLL(XXXXXX)
YYYmm
SHEET(XXXXXX)
YYYYmm
FACE(XXXXXX)
YYYYmm
BACK(XXXXXX)
YYYYmm
NEST(XXXXXX)
YYYmm
MEDIA REG MENU
Menu
#SELECT MEDIA
>XX:YYYYYY
#RENAME MEDIA
>XX:YYYYYY
#SMART PASS
>XX:LOW
#DENSITY
>XX:NORMAL
#PRINT DIRECTION
>XX:BIDIR
#USE EDGE GUARD
>XX:YES
#SKEW CHECK
>XX:ON
#MEDIA ADV MODE
>XX:FWD ONLY
#MEDIA BACK MODE
>XX:BACK & FWD
#SUCTION FAN LEVEL
>XX:HIGH
#AFTERHEATER T
>XX:30°C
#PRINTHEATER T
>XX:40ºC
#PREHEATER T
>XX:40°C
#COLOR STRIPE
>XX:ON
#PH HEIGHT VAL
>XX:+0.0
#PH CLEANING
>XX:START & END
42
Set the quantity of ink supplied in the reservoir.
Display the amount of ink that can be used with the Printer.
Extend the amount of ink that can be used with the Printer using an ink extension chip.
Check the information inside the ink extension chip.
Supply ink in the subcartridges from the reservoirs.
XXXXXX: Media name
YYYY: Media width
XXXXXX: Media name
YYYY: Media width
XXXXXX: Media name
YYYY: Media width
XXXXXX: Media name
YYYY: Media width
XXXXXX: Media name
YYYY: Media width
Select the media number of media to be registered or parameter-corrected.
Name (register) the media number selected in [SELECT MEDIA]. Six (6) digits of character (or code) can be
entered for the media name. For character string of 6 digits, codes, alphanumerics and katakana characters can
be used.
Select the intensity for the auto correction function which ameliorates the print quality (unevenness, etc).
Select a print density.
Select a print direction.
Select whether to use the media edge guard or not.
Select whether to perform a skew check when printing.
Select a media advance mode.
Select a media advance mode.
Select the force (air volume of fan) to suck the media to the platen.
Set the afterheater temperature. However, when "**" is set, the postheater does not work.
Set the printheater temperature. However, when "**" is set, the print heater does not work.
Set the preheater temperature. However, when "**" is set, the preheater does not work.
Select whether to print color stripes or not.
Adjust the print head height.
To keep the print head condition, select a cleaning mode which is automatically performed by the printer.
Outline of functions
Outline of functions
Outline of functions