Idiomas disponibles
Idiomas disponibles
SIARR
04 - 106
PREPARATION
* Remove spare wheel.
ASSEMBLY
* Install in the rear crossbeam the 2 angles D (see opposite diagram).
* Position the towing on the rear cross beam and attach it
without tightening with the nuts and bolts V and W.
* Position the crosspieces in the spars.
* Attach, without tightening, the arms B and C with
the nuts and bolts Z, then with the nuts and bolts X.
* Attach the ball joint with the nuts and bolts U.
FINISHING
* Tighten all the nuts and bolts to the torque indicated as follows.
FASTENING KIT
2 off HM16x45 screws
U
2 off DEC16 washers
2 off HM16 nuts
2 off CS10 washers
V
2 off HM10 nuts
2 screws HM10x60 guiding end
W
2 off CS10 washers
4 off HM10x35 screws
4 off 10-27 plain washers
X
4 off CS10 washers
4 off HM10 nuts
M16
AC8.8
19,5daNm
M12
M16
AC10.9
27,5daNm
M10
M12
AC8.8
8,1daNm
M10
ASSEMBLY INSTRUCTIONS
1 off HM10x90 screw
1 off CS10 washer
Y
1 off spacer (dia.ext.17,
dia.int.12, Long.51mm)
1 off HM10x90 screws
1 off 10-27 plain washer
1 off CS10 washer
Z
1 off HM10 nut
1 off spacer (dia.ex.17,
dia.int.12, Long.51mm)
TORQUES :
AC10.9 11,4daNm
M8
AC8.8
AC8.8
4,7daNm
M8
AC10.9
AC10.9
6,7daNm
Type
Type
Approval No.
Tow-bar for
e11*94/20*00*0475
Renault Kangoo
(Standard)
NB : Electrical diagram inside our universal or custom wiring kits.
PLEASE NOTE : (to familiarise yourself with the operating charasteristics refer to the log)
2,3daNm
If this tow bar is fitted in accordance with our recommendations it will give a complete-
3,3daNm
ly satisfaction. We cannot accept any responsability in the event of changes to or
improper use of this item.
FICHIER : BUREAU\NOTICEDEMONTAGE\WESTFALIA\NDM04106-F - FOLIO NDMANG
316279600001
Max. Total
Max. Total
Authori. Weight Towable Weight
1 335 kg
1 355 kg
Max. Verti-
Value
cal load
D
75 kg
6,60 kN
