Before Installing - StetSom HIGH LINE HL800.4 Manual De Usuario

English
Features
The amplifier offers 4 channels divided into front (FRONT) and rear (REAR)
channels with independent controls:
LEVEL: Adjusts the level of the input signal;
▪
CROSSOVER: Lets you choose between Low-Pass, High-Pass or Flat (Full-
▪
Range) performances.

Before installing

Please read this manual carefully.
▪ All product connections must be made with the product turned OFF.
▪ A fuse must be installed between the amplifier and the battery is required
to protect against overcharging. The fuse has to be installed as close to the
battery as possible. Check the proper fuse for the amplifier according to its
consumption.
▪ Use gauges recommended in this manual to avoid the overheating of the
cables to obtain maximum power.
▪ Keep the cables as short as possible to increase sound fidelity and avoid
potential power losses.
▪ Route the installation cables as far away as possible from the original
vehicle wiring as it may cause interference and noise in your audio system.
▪ Perform the installation in a firm, ventilated and dry place.
▪ Installation must be done by a qualified professional.
If you have questions , contact the store where the purchase or
installation was made. For more information please contact our
Customer Service: BR +55 18 2104-9412.
11