Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Input and audio controls
1
2
3
4
3
2
1
ventilation
ventilation
1. INPUT (Front e Rear):
This input should receive the signal through an RCA
cable that is properly connected to the RCA output of the Radio/MP3 Player.
Entries are divided into REAR (rear channels) and FRONT (front channels).
We recommend RCA cables with STETSOM triple shielding.
2. LEVEL (Volume control):
Responsible for controlling the level of the input
signal. The left regulator controls the REAR input and the right regulator
controls the FRONT. They provide proper adjustment for any Radio/MP3 Player.
3. CROSSOVER (SLIDE SWITCH L.P.F./ FLAT / H.P.F):
This switch allows you
to select that type of CROSSOVER will be used for the channels, with the
left regulator for the REAR input and the right for the FRONT input.
The switch has three positions:
L.P.F: In this position, the LOW-PASS filter that reproduces low frequencies
(below 90Hz) will be activated;
FLAT: In this position, the channel will be operating in FULL-RANGE and all
the frequencies present in the audio will be reproduced;
H.P.F: In this position, the HIGH-PASS filter that reproduces the high
frequencies (above 90Hz) will be activated.
4. COOLER:
It provides cooling of the amplifier. Install in a cool place without
obstruction of air inlets and outlets.
12
Tabla de contenido
