Technical Specifications - StetSom HIGH LINE HL800.4 Manual De Usuario

Technical specifications

MODEL
Number of Channels:
Impedance:
Power @ 14.4V (STEREO):
Power @ 14.4V (BRIDGE):
Power @ 12.6V (STEREO):
Power @ 12.6V (BRIDGE):
Minimum Output Impedance:
Input Impedance:
Minimum Input Sensitivity:
Total Harmonic Distortion:
Signal to Noise / Ratio:
Frequency Resp. @ 8 Ohms (-3dB):
Crossover Low Pass Switch:
Crossover High Pass Switch:
Bass Boost (Low Pass):
Power Supply Voltage:
Musical Consumption:
BASS Consumption:
Dimensions (H x W x L):
Weight:
The data measured are based on STETSOM laboratory equipment. Test reference in frequency
from 1Khz with THD + N at ≤10% in impedances as indicated in each measurement. The electronic
components and the manufacturing process may present manufacturing variations, thus leading to
a variation in the measurements made.
1 OHM
4 x 285 W RMS
@ 1 OHM
4 x 226 W RMS
@ 2 OHMS
2 x 609 W RMS
@ 2 OHMS
4 x 260W RMS
@ 1 OHM
4 x 204W RMS
@ 2 OHMS
2 x 520W RMS
@ 2 OHMS
1 OHM (STEREO)
2 OHMS (BRIDGE)
20Hz ~ 26KHz
52.5A
105A
2.5" x 8.1" x 8.1"
3.7 lb
16
HL800.4
4
2 OHMS
4 x 278W RMS
@ 2 OHMS
4 x 178W RMS
@ 4 OHMS
2 x 556W RMS
@ 4 OHMS
4 x 260W RMS
@ 2 OHMS
4 x 165W RMS
@ 4 OHMS
2 x 520W RMS
@ 4 OHMS
2 OHMS (STEREO)
4 OHMS (BRIDGE)
15 kOHMS
200mV
< 0.3 % THD
> 90 dB
10Hz ~ 26KHz
90 Hz
90 Hz
+12 dB
9V ~ 15V
44A
88A
3.7 lb