D - Setup; Overview; Camera Settings; Recording Parameters - THOMSON 512166 Manual De Instrucciones

d - SETup

1 - OVERVIEw

The Thompson colour video touchscreen intercom
is a top-of-the-line video intercom allowing you to
see your visitors, talk to them, and control access
to your property. You can announce the presence
of a visitor using a chime bell, see who is visiting,
respond and talk to the visitor and, if you choose to
do so, trigger the opening of an electric strike plate
or a motorised gate (not included).
The intercom panel included is designed to
withstand bad weather and is surface-mounted to
a pillar or boundary wall. The heavy-duty aluminium
casing ensures the device will operate consistently
and for a long time.
The intercom panel is equipped with infrared LEDs
for night vision, which are controlled by a dusk-
to-dawn sensor enabling black and white images
of your visitors to be produced even in complete
darkness.
The monitor records a short video of your visitor on a
memory card (not included) each time a call is made
from the intercom panel.
The use of wireless technology means the device
can be installed in place of an existing wired chime
bell, for example, without having to modify the
existing equipment.
It is possible to add up to 3 additional wireless
cameras (not included, ref. 512167) for indoor or
outdoor use in order to trigger recordings of motion
detected within the scope of one of the cameras, or
to trigger recording manually.
2 - MAIN MENU
To access the main menu, press the
the monitor.
1 2
5 6
1 Camera settings
2 Recording parameters
12
EN
key on
3 4
7 8
Wireless colour Video intercom With
Video surVeillance option
3 Files (organised by date and time band)
4 System setup
5 Activate motion detection alarm
6 Zoom
7 Camera scan
8 Finalise the memory card formatting

3 - CAMERA SETTINGS

With this menu you can activate or deactivate
channels, pair additional cameras (not included, ref.
512167) and adjust the camera brightness.
If you only have an intercom panel, deactivate
channel 2 (activated by default).
Your product includes a total of 4 channels and your
intercom panel is assigned to channel 1 by default.
Therefore you can add 3 more cameras to set up
video surveillance.
Once you have activated the desired channel,
proceed to camera pairing by pressing the
Warning: once this key turns blue you have 30
seconds to quickly press the pairing button:
• for the intercom panel which is under the
battery housing
• for the camera which is on the power cord
(camera not included, ref. 512167)

4 - RECORDING PARAMETERS

Important: in order to record videos, the monitor
must have a Micro SD memory card (not included).
Software for playing back on your computer videos
that have been recorded on the memory card is
included in the box.
To configure the various recording modes, use the
following keys:
key.